Reply To: My Cessna build

Home Forums Construction My Cessna build Reply To: My Cessna build

#3324
Marco
Participant

To mark the holes for the multi panel I attached the panel with some sticky tape and used a 4mm drill bit as a punch mark.

IMG_2171
Next the GPS panel. I bought a 7“ touch panel on Amazon (50€). First the cut in the front, in a second step a 45° edge with the router and finally a 6mm deep groove on the backside according to the size of the panel to make it come closer to the front using a router.

IMG_2175
IMG_2176
IMG_2178

tbc.