Alan

Forum Replies Created

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • in reply to: Building my panel – Arduino and ArdsimX #3107
    Alan
    Participant

    Here’s the update on the audio panel. Finished it using balsa wood and some thin black plastic sheets I found. I need to cut down the depth of it as it will protrude a little too far off the panel. Works great and doesn’t look terrible for the materials used.IMG_0701

    Attachments:
    You must be logged in to view attached files.
    in reply to: Building my panel – Arduino and ArdsimX #3106
    Alan
    Participant

    Thanks for sharing, that is exactly the site I’ve been using to learn how to set this up. I don’t know if mine will look like theirs in the end but hopefully it will look similar.

    in reply to: Sim almost finnished #3101
    Alan
    Participant

    Yeah, a touch panel would be nice to have. I originally thought about making a modern baron 58 with a g1000 and a garmin 750. It would be much easier to setup but I want to use my sim for training for a baron 58 that the company I work for leases. I’ll make a post about my panel as soon as I get a little further on the project. For now I am working on the audio, radio, garmin 530, transponder, and autopilot panels. I am using balsa wood to make for forms as I don’t have access to a 3d printer. Once I get the form for each one I will cut the holes for buttons, lights and encoders and get them wired up via arduino. Project for this week is making my audio panel.

    in reply to: My Cessna cockpit 172 #3099
    Alan
    Participant

    looks great

    in reply to: Sim almost finnished #3098
    Alan
    Participant

    Did you print the 3d bezels yourself? I am building a Baron 58 cockpit and am just starting on the dash.

    in reply to: Start building Cessna cockpit #3085
    Alan
    Participant

    Do you have any better pictures of your GPS? I am starting to build my entire panel from an Arduino board.

    in reply to: Setting for GoPro to make video #3047
    Alan
    Participant

    I’d like to see some of your videos if you post them on youtube or file sharing.

    in reply to: GA Center Console #3040
    Alan
    Participant

    Excellent! I think I am going to build something similar for mine. I am going to try to create a Baron 58 cockpit but I have a very limited budget so I am just buying a few pieces here and there.

    in reply to: GA Center Console #3016
    Alan
    Participant

    looks good

    in reply to: My Sim build so far… #3001
    Alan
    Participant

    Looks great so far! I just built my frame and am slowly buying electronics for it. What generation IPads are you using? I have a spare computer monitor that I’ve thought about using for my instruments but I’ve been playing around with air manager on an ipad as well.

Viewing 10 posts - 1 through 10 (of 10 total)