How To Flip Both X-Plane Cessna 172 Avionics Switches With Single A Physical Switch

A question that comes up here from time to time is how to have a single physical avionics switch, like that in the great Desktop Aviator switch panel, flip both avionics switches in the X-Plane Cessna 172 (which has two, one on each electronics bus). The answer is to assign the “cross-tie” command to the physical switch, not the avionics toggle command. Hope that helps.

4 thoughts on “How To Flip Both X-Plane Cessna 172 Avionics Switches With Single A Physical Switch

  1. Greetings…. when you get a chance could you elaborate on how to Cross-tie the physical switch. (I asking cause some of us out there might not know how. wink wink!!! ;P

    Thanks in advance.
    Paul

  2. Hi,
    If you assign the cross-tie it seems to switch only the BUS 2 button. Does it switch both BUS1 and BUS2 at once?

    Please let me know.
    Thanks!

Leave a Reply to Basement Fly Guy Cancel reply